PDA

توجه ! این یک نسخه آرشیو شده میباشد و در این حالت شما عکسی را مشاهده نمیکنید برای مشاهده کامل متن و عکسها بر روی لینک مقابل کلیک کنید : ::آخرین به روز رسانی های باکس atf ::



choopan
28-05-2011, 11:19
در این تایپیک آخرین بروزرسانی های باکس ATF قرار داده میشوند.



http://www.mobilestan.net/attachment.php?attachmentid=566702&stc=1&d=1306570562




Download (https://rapidshare.com/#!download|408tl2|1695628749|ATF_v7.50_Full_Instal ler.rar|41190|R~B328CD0829C3365D590A44FFE9181933)

choopan
23-06-2011, 10:38
***:::آپدیت جدید :::***ورژن 7.65



http://www.mirrorcreator.com/files/CNDHSVHN/ATF_v7.65_Full_Installer.rar_links

choopan
23-06-2011, 10:53
لینک غیر مستقیم 7.65:::***


http://www.4shared.com/file/oETG-n_v/ATF_v765_Full_Installer.html

Reza.Ahmadi
29-08-2011, 01:20
v7.70



BB5 Major Functions Added:

Read Flash Enabled for RAPUYAMA Phones via USB or FBUS
Read Flash Enabled for RAP3Gv40 Phones via FBUS and USB (USB Limited to 8MB per Session)
Read Flash Enabled for RAPIDO Phones via FBUS ONLY
Extract Phonebook Contacts from Symbian ^3 and Symbian Anna Flash Dumps made by the Read Flash Function
Supports International Unicode Characters for Contacts Extraction (Chinese, Arabic, Thai etc...)
Recover Videos, Pictures, Music and Documents from ALL Flash Dumps made by the Read Flash Function

SL3 Bruteforce Server Added:


SL3 Bruteforce JOB Uploading is now OPEN to ATF Network Users (Paid Service... Contact Your Reseller)
Upload JOBS, Cancel JOBS and Check JOB Status with just a click of a button
Only accepts "JOB" files generated by ATF Software's Decrypt PM 120 Function

Infineon Major Functions Added:



Mass Memory (SD Card) Flashing Added for the NEWEST Infineon Phones (C2-02, C2-03, C2-05, C2-06, C2-07 and C2-08)

Common Updates:

New BB5 Flash Loaders Version 11.24.000.3
New Nokia Connectivity Driver 7.1.42.0

Support Site Updates:

Special ATF ENO Files are NOW AVAILABLE for new RAPUYAMA PHONES (N8-00, C7-00, X7-00, E7-00 etc...)

These ENO Fies were Dumped by the ATF Team and you can ONLY FIND them at the ATF Support Site

Bug Fixes:



E6-00 and X5-01 Nitro Flashing Speed FIXED

Rapido ADL Flashing Bug for E71, E63 etc.. FIXED
USB ADL Flashing Format Partitions FIXED
BB5 Booting Speed FIXED
MMC Password Reading now Supports Unicode Characters

از لینک زیر قابل دریافت است.
http://advance-box.com/atfsoft/download.php

choopan
17-09-2011, 09:59
آپدیت جدید باکس ATF ورژن 7.77 ارائه شد .


با استفاده از قسمت update file گزینه cheks update software را بزنید تا باکس اتوماتیک خودش رو آپدیت کنه.

adroit11
18-09-2011, 19:14
چوپان عزيز نه ياهو جواب ميدي نه پيغام پس خواهشا
http://forum.mobilestan.net/showthread.php?t=60798&page=469 بيا و مشكلمونو حل كن

Reza.Ahmadi
03-11-2011, 23:15
ATF v7.80 Update


Release Date: October 25, 2011

BB5 Major Functions Added:

<<< All BB5 Flash Functions are now using the Newest Nokia Loaders 11.34.000.2 >>>

- Authorize Phone for RAPUYAMA v2.1 Phones via USB or FBUS (Nokia
500, 600, 603, 700, 701 etc...)

---> SD Repair
---> Stand Alone SX4
---> Read PM 120 Hashes

- Read Flash Enabled for RAPUYAMA v2 Phones via USB or FBUS (Nokia
500, 600, 603, 700, 701 etc...)
- Read Flash Enabled for RAP3Gv30 Phones via FBUS Cable (5130c,
3110c, 7210c, 6300c etc...)
- Read Flash 8MB Limitation on RAP3Gv40 Phones Removed... Now you
can Dump Full Flash Chip in 1 Session
- Extract Phonebook Contacts from Symbian Belle Flash Dumps made by the Read Flash Function
- Write Full Nokia Original RPL for all BB5 Phones (SL1, SL2, SL3,
PA_SIMLOC30 15-digit and PA_SIMLOCK30 20-digit)

---> Write Simlock Data
---> Write Super Dongle Key
---> Write CMLA Key
---> Write WMDRM Key
---> Write PARTNERC (If Available)
---> Write MDM_KEYS (If Available)

- N900, N950 and N9-00 Full PM Backup Fixed
- Read / Write Product Profile Added
- Added more Phone Modes for changing (Alarm, Charging, Discharging etc...)
- Added Ability to read Multiple MMC Passwords in 1 Phone (upto 16 MMC Passwords)



SL3 BF Server Changes:

- Reduced SL3 BF Price from 30 Credits to 25 Credits



General Updates:


- Added New Products to Nokia.ini
- Added Updated Provider Listing for MNC_MCC Codes
- New Skins Added with Better Compatibility
- Fixed FTDI Device Close problem on New FTDI Libraries
- Mass Memory Flashing Automatically Switches to Turbo Mode when needed.
- Reads more Information from the Phone during Scan Phone (All Information Available)
- Fixed Problem for ATF Boxes which ask you to install Drivers each time you Start ATF Software


Support Page Updates:

- Added Credit Transfer for ATF Activation Credits (Now you can transfer your activation credits extra to other boxes)


Driver Updates:


- ATF Box Driver v2.08.17(Beta)
- Nokia Connectivity Driver v7.1.45.0
- libusb Driver v1.2.5.0


Update Summary:


1. Uses Latest Nokia Loaders 11.34.000.2
2. Can Authorize ALL BB5 Phones
3. Can Read Flash Chip from ALL BB5 Phones except RAP3Gv2 (6630, N90, N70... very old Phones)
4. Can Extract Contacts from Symbian Belle Flash DUMPS
5. Can Full Write Nokia ORIGINAL RPL

Download (http://reza1157.s104.rapidbaz.com/premium/0633745248d6d2cda906535aadec1e7d/4eb2f635/s104.eu./24319573?ATF_v7.80_Full_Installer.rar)

oldgods
19-05-2012, 14:42
اين به روز رساني شده الان؟

UFA
19-05-2012, 17:13
نسخه جديد


ATF v8.70 Full

TF v8.70 Update!! 25 APR 2012!!
Flashing Updates:

--> Lumia 900 RM-808 and RM-823 Now Fully Supported and Tested
--> Blocked Cross Flashing a X3-02.5 (RM-775) with a X3-02 (RM-639) Flash File
--> Blocked Cross Flashing a C3-01.5 (RM-776) with a C3-01 (RM-640) Flash File
--> Dual CPU (CMT + APE) New Protocol FBUS Flashing Re-Activated (N95, E90)
--> Dual CPU (CMT + APE) Phone Authorize via The ATF Network Re-Activated
--> Dual CPU (CMT + APE) ADL USB Flashing Re-Activated (N95-8GB, N95, N73, E90)
--> Dual CPU (CMT + APE) First In The World ADL USB Recovery Flashing (N95-8GB, N95, E90)

Other Updates:
--> Improved Drive Detection for ALL SYMBIAN APE Phones...
--> FORMAT FILE SYSTEM Now Supports S40 FILE2 Drives (5130c, X2-01, etc..)
--> REMOVE SD Card Password via S40 Phone FILE2 Format of Drive E:

DCT4 Update:
--> DCT4 ASIC 2-5-6-7 SP Data Rebuild for DIRECT UNLOCK and REPAIR

Other Updates:
--> New Products Added to Nokia.ini

Bugs Killed in this Update:
--> Fixed SUB SCAN PHONE = PC Restart Bug on some AMD and Intel Core2 Computers
--> Fixed USB Flashing "MCU CONFIGURATION IS NOT VALID"
--> Fixed Battery Value 0 Error When Flashing via USB
--> Fixed USB Booting Problem Delay on FUR
--> Fixed FBUS Buscheck Timeout Delays (Faster Buschecks Now)
--> Fixed Bug on Unsupported "NORMALIZE SUSD" Flash Files
--> Fixed RAP3Gv3 FBUS Flashing Bug "Please Check RX2 Blah Blah..."
--> Adjusted Infineon USB Flashing to exit properly during a Flash Error



Special Thanks Goes To:

ashish_gsm <-- USB Scan Phone Surrogate PC for Debugging
MOYAL <-- USB Scan Phone Fix Beta Tester



Some Clarifications:

1. Old Phones Can now be flashed with New Loaders and New Protocol (like 5130 and N95-8GB).
But it is still BETTER to use OLD PROTOCOL and OLD LOADERS for these Phones.

2. You can now flash N95-8GB, N73, E90 etc via USB Cable Only.

3. Nitro and Lightning users can now EASILY REMOVE Password from any SD Card without buying
or making an SD Card Cable Adapter. Simply put SD Card inside a S40 Phone like 5130c or
X2-01 etc... When card is now inside the phone, use FILE SYSTEM FORMAT Option to Format
Drive E:... That is it!

منبع (http://forum.gsmhosting.com/vbb/8354041-post41.html)



ATF v8.70 Update!! 25 APR 2012!! (http://www.4shared.com/rar/v7NSSgIw/ATF_v870_Full_Installer.html)


نسخه جديد


ATF v8.70 Full

TF v8.70 Update!! 25 APR 2012!!
Flashing Updates:

--> Lumia 900 RM-808 and RM-823 Now Fully Supported and Tested
--> Blocked Cross Flashing a X3-02.5 (RM-775) with a X3-02 (RM-639) Flash File
--> Blocked Cross Flashing a C3-01.5 (RM-776) with a C3-01 (RM-640) Flash File
--> Dual CPU (CMT + APE) New Protocol FBUS Flashing Re-Activated (N95, E90)
--> Dual CPU (CMT + APE) Phone Authorize via The ATF Network Re-Activated
--> Dual CPU (CMT + APE) ADL USB Flashing Re-Activated (N95-8GB, N95, N73, E90)
--> Dual CPU (CMT + APE) First In The World ADL USB Recovery Flashing (N95-8GB, N95, E90)

Other Updates:
--> Improved Drive Detection for ALL SYMBIAN APE Phones...
--> FORMAT FILE SYSTEM Now Supports S40 FILE2 Drives (5130c, X2-01, etc..)
--> REMOVE SD Card Password via S40 Phone FILE2 Format of Drive E:

DCT4 Update:
--> DCT4 ASIC 2-5-6-7 SP Data Rebuild for DIRECT UNLOCK and REPAIR

Other Updates:
--> New Products Added to Nokia.ini

Bugs Killed in this Update:
--> Fixed SUB SCAN PHONE = PC Restart Bug on some AMD and Intel Core2 Computers
--> Fixed USB Flashing "MCU CONFIGURATION IS NOT VALID"
--> Fixed Battery Value 0 Error When Flashing via USB
--> Fixed USB Booting Problem Delay on FUR
--> Fixed FBUS Buscheck Timeout Delays (Faster Buschecks Now)
--> Fixed Bug on Unsupported "NORMALIZE SUSD" Flash Files
--> Fixed RAP3Gv3 FBUS Flashing Bug "Please Check RX2 Blah Blah..."
--> Adjusted Infineon USB Flashing to exit properly during a Flash Error



Special Thanks Goes To:

ashish_gsm <-- USB Scan Phone Surrogate PC for Debugging
MOYAL <-- USB Scan Phone Fix Beta Tester



Some Clarifications:

1. Old Phones Can now be flashed with New Loaders and New Protocol (like 5130 and N95-8GB).
But it is still BETTER to use OLD PROTOCOL and OLD LOADERS for these Phones.

2. You can now flash N95-8GB, N73, E90 etc via USB Cable Only.

3. Nitro and Lightning users can now EASILY REMOVE Password from any SD Card without buying
or making an SD Card Cable Adapter. Simply put SD Card inside a S40 Phone like 5130c or
X2-01 etc... When card is now inside the phone, use FILE SYSTEM FORMAT Option to Format
Drive E:... That is it!

منبع (http://forum.gsmhosting.com/vbb/8354041-post41.html)

براي دانلود روي لينك زير كليك كنيد


ATF v8.70 Update!! 25 APR 2012!! (http://www.4shared.com/rar/v7NSSgIw/ATF_v870_Full_Installer.html)

UFA
18-06-2012, 11:09
ATF_v8.80_Full

Advance Turbo Flasher v8.80


Flashing Updates:--> Lumia Flashing Optimization for 610, 710, 800 and 900 Flash Files
--> BB5 USB Flashing Default Timeout Corrections on RAPUYAMA Booting
--> BB5 DUAL CPU New Protocol Flashing (N95, N95-8GB, N90 Etc) Speedup


Driver Updates:
--> New ATF Box FTDI Drivers 2.08.24
--> Nokia Connectivity Driver v7.1.78.0
--> Lumia New WinUSB Drivers (32-Bit and 64-Bit)


Bug Fixes:--> DCT4 ASIC 2-5-6-7 Direct Unlocking Fixed for Custom Profile Bits

http://www.4shared.com/rar/4w_1KWsZ/ATF_v880_Full_Installer.html
https://hotfile.com/dl/157350337/986fd83/ATF_v8.80_Full_Installer.rar.html


http://forum.gsmhosting.com/vbb/f609/atf-v8-80-new-update-public-discussion-thread-1483878/

hadi-hamodi---
11-07-2012, 22:50
A New EXE Update v8.95 has been uploaded to the ATF Server.

To Get this Update, please follow the Steps in this link:
How to use ATF AUTO-UPDATE Feature [Tutorial]


N9-00 SPECIAL Update !!!

http://174.120.45.27/tmp/n9_daddy.jpg



Special Features (Requires ATF Network Authorization):
--> N9-00 RM-696 SL3 Unlock via Brute Force (Decrypt PM 120)
--> N9-00 RM-696 ***** Dongle Repair
--> N9-00 RM-696 SX-4 Authorization for entire PM Area (Except PM 308)
--> ALL N9-00 Special Features ONLY NEED USB CABLE Connection

Flashing Updates:
--> NONE

Bug Fixes:
--> Fixed Authorize Phone via FBUS ERROR



User Notes:
1. If you want to do any PM WRITE functions to N9 Phones, you must
first unlock the entire PM Area via SX-4 Authorization because the
ENTIRE PM AREA is Protected by SX-4.

Example, if you want to reset FBUS/KEYPAD Lock Counters, you need
to SX-4 Authorize the Phone first.


2. I will repeat this again, because it seems some people claim that
they can read Security Code from N9-00 very easily....

The SECURITY CODE read by SCAN PHONE is NOT THE Phone Lock
Code. The Phone lock code is running on the OMAP APE Side and the
SECURITY CODE is for the CMT side, which is practically useless.


3. This is very very IMPORTANT! All N9-00 phones will NOT ACCEPT
NCK Codes via KEYPAD Entry because you will NOT GET "w" if you
want to type #pw+123456789012345+7#...

So it would be EASIER for you to just enter the NCK Codes via USB
Cable.

Or you can also try to ENTER the NCK Code via the Phone Menu:
SETTINGS - DEVICE - SIM CARD - ENTER UNLOCK CODE

Personally, I did not try this method, and it requires that there should
be a SIM Card inserted to the phone...


( 4. ATF is the ONLY tool which supports Nokia N9 SP Unlock
( No Regards to COPY-PASTERS )

Public discussion thread:
GSM-Forum - View Single Post - ATF N9 Unlock v8.95 Update July 1, 2012!!! Public Discussion Thread:



Who will buy this if you can get more in ATF?


http://174.120.45.27/logo/fps21.jpg

__________________________________________________ ________________________



Buy only from ATF [Advance Turbo Flasher] authorized resellers:
ATF [Advance Turbo Flasher] Authorized Distributors and Resellers List


ATF [Advance Turbo Flasher] official web sites:
International - http://www.advance-box.com/

ATF [Advance Turbo Flasher] official support forums:
World Wide: Advance Turbo Flasher - GSM-Forum
Indonesia: ATF (Advance Turbo Flasher))
Philippine: Gsmph
Syria: Arabic Support (Syria) GsmVIP
Chinese support forum : ATF Box
Vietnam: Saigonmobile
India: Advance Box - .:: GsmIndia ::.
Official Iran Support Forum : ASANGSM FORUM
Bangladesh: Advance Box - Dhaka Mobile
Chinese Support forum : www.yananliuhuan.com



The Master Piece


http://174.120.45.27/images/advance-ATF-logo-trans.png

Always The First

hadi-hamodi---
16-08-2012, 19:49
Introducing The ATF Simlock Recovery Module v1.0


Introduction:


In the past, when a dead Nokia BB5 SL3 Phone comes to your shop, it was only
possible for you to backup the IMEI via a Backup RPL Function. There was no
way for you to backup a possibly 100% working SIMLOCK inside the phone because
you needed Local/Test Mode in order to get the PM Backups. Dead Phones cannot
give you Local/Test Mode at all, so you cannot backup the Simlocks even if you
wanted to.
Now here comes the Solution... The ATF Simlock Recovery Module v1.0 will allow
you to BACKUP SIMLOCKS from a DEAD PHONE! Just a 1-click solution for Recovery
Level 1 and Level 2 for NON-CORRUPTED SIMLOCKS on a DEAD PHONE.
Even if your phone SIMLOCKS are CORRUPTED, The ATF Network can still attempt to
perform a Level 3 Recovery from it, but it will cost you some ATF SL3 Credits.

Here is a Short Description about the three Simlock Recovery Levels:

Recovery Level 1:

* FREE for ALL ATF BOX Users (DOES NOT NEED CREDITS or ATF NETWORK ACTIVATION)
* Phone DOES NOT need to be AUthorized
* 100% Stand Alone
* Supports ALL SL3 XSR3 NAND Blocks for RAPUv1, RAPUv2, RAPIDO, RAPG3v4 and BCM21351
* Supports ALL SL3 XSR2 NAND Blocks for RAPUv1, RAPUv2, RAPIDO, RAPG3v4 and BCM21351
* Supports ALL SL3 NOR Blocks for RAP3Gv3 (FULL PM RECOVERY)
* Supports ALL SL2 NOR Blocks for RAP3Gv3 (FULL PM RECOVERY)
* Supports ALL SL1 NOR Blocks for RAP3Gv3 (FULL PM RECOVERY)
* Supports USB or FBUS Connection (FBUS ONLY FOR RAP3Gv3)
* Recover from DUMP FILE or from Connected PHONE
* ***** Fast Recovery, BUT SIMLOCKS WILL NOT BE VERIFIED
* The output file is a REGULAR PM FILE with PM 120 Sections 0, 1, 2 and 3
* DOES NOT SUPPORT FULLY ERASED PHONES
* SUCCESS RATE = 70% if the CORRECT SIMLOCKS ARE STILL INSIDE THE FLASH DUMP

Recovery Level 2:

* FREE for ALL ATF Network Users (DOES NOT NEED CREDITS)
* Phone NEEDS to be Authorized via The ATF Network
* Stand Alone ONLY AFTER PHONE IS AUTHORIZED via The ATF Network
* Supports ALL SL3 XSR3 NAND Blocks for RAPUv1, RAPUv2, RAPIDO, RAPG3v4 and BCM21351
* Supports ALL SL3 XSR2 NAND Blocks for RAPUv1, RAPUv2, RAPIDO, RAPG3v4 and BCM21351
* Supports ALL SL3 NOR Blocks for RAP3Gv3 (FULL PM RECOVERY + RECOVER ORIGINAL SIMLOCKS if SIMLOCKS are OVERWRITTEN)
* Supports ALL SL2 NOR Blocks for RAP3Gv3 (FULL PM RECOVERY)
* Supports ALL SL1 NOR Blocks for RAP3Gv3 (FULL PM RECOVERY)
* Supports USB or FBUS Connection (FBUS ONLY FOR RAP3Gv3)
* Recover from Connected PHONE ONLY
* Recovery Time will depend on Fragmentation Level of the XSR Blocks
* SIMLOCKS WILL BE VERIFIED (Since Phone is already Authorized)
* The output file is a REGULAR PM FILE with PM 120 Sections 0, 1, 2 and 3
* DOES NOT SUPPORT FULLY ERASED PHONES
* SUCCESS RATE = 95% if the CORRECT SIMLOCKS ARE STILL INSIDE THE FLASH DUMP

Recovery Level 3:

* Needs SL3 Credits and only available for ATF Network Activated Users
* Phone NEEDS to be Authorized via The ATF Network
* Recovery is performed by our Servers (NOT STAND ALONE)
* Supports ALL SL3 XSR3 NAND Blocks for RAPUv1, RAPUv2, RAPIDO, RAPG3v4 and BCM
* Supports ALL SL3 XSR2 NAND Blocks for RAPUv1, RAPUv2, RAPIDO, RAPG3v4 and BCM
* Supports ALL SL3 NOR Blocks for RAP3Gv3
* Supports USB or FBUS Connection (FBUS ONLY FOR RAP3Gv3)
* Recovery Time will depend on CURRENT TASK LOAD on the ATF Simlock Recovery Server
* SIMLOCKS WILL BE VERIFIED (Since Phone is already Authorized)
* The output file is a REGULAR PM FILE with PM 120 Sections 0, 1, 2 and 3
* POSSIBLE TO SUPPORT OVERWRITTEN PM 120 Blocks with Wrong PM 120 Blocks
* POSSIBLE TO SUPPORT FULLY ERASED PHONES
* DOES NOT SUPPORT WRONG FLASHED PHONES with WRONG FIRMWARE (Repartitioned NANDs)
* SUCCESS RATE = 95% if the Phone is not wrongly Repartitioned by a wrong Firmware

IMPORTANT INFORMATION:


1. Level 1 Recovered Simlocks are NOT VERFIED to be Working (NOT GUARANTEED)
2. Level 2 Recovered Simlocks are 100% VERIFIED and Guaranteed to WORK
3. Level 3 Recovered Simlocks are 100% VERIFIED and Guaranteed to WORK

Summary:

If your phone is DEAD, but the SIMLOCKS are 100% OK, then the ATF Simlock
Recovery Module will recover your simlocks for you via Recovery Level 1 or 2.
If your phone is DEAD, and the SIMLOCKS are possibly corrupted, then the
ATF Simlock Recovery Module will recover your simlocks for you via Recovery
Level 3 + ATF SL3 Credits.

Box Firmware Update:

New ATF Firmware LogiCore 10.3.15 for ATF Chrome, ATF Lightning and ATF Nitro Boxes

Other Updates:
* MEEGO PHONE Authorization EVEN IF 20-digit SL3 Code is detected.
* Shows full RPL (Certificates) Information during Backup RPL on BB5 Phones.
--> Checks Original IMEI
--> Checks Original Product Code
--> Checks PA_PUBLIC_ID
--> Checks PA_PUBLIC_KEYS_HASH
--> Checks Original BT ID
--> Checks Original WLAN ID

* New option in Settings "Select USB Connection by Default when ATF Software Starts"
* Cross Flashing is now IMPOSSIBLE if Phone has good IMEI (NO MORE WRONG FIRMWARES)
* Flash File CRC32 is now CHECKED BY DEFAULT on Flash Files downloaded from NaviFirm etc...
* Other small tweaks which I already forgot to mention...

Who will buy this if you can get more in ATF?




__________________________________________________ ________________________





Buy only from ATF [Advance Turbo Flasher] authorized resellers:
ATF [Advance Turbo Flasher] Authorized Distributors and Resellers List


ATF [Advance Turbo Flasher] official web sites:
International - http://www.advance-box.com/

ATF [Advance Turbo Flasher] official support forums:
World Wide: Advance Turbo Flasher - GSM-Forum
Indonesia: ATF (Advance Turbo Flasher))
Philippine: Gsmph
Syria: Arabic Support (Syria) GsmVIP
Chinese support forum : ATF Box
Vietnam: Saigonmobile
India: Advance Box - .:: GsmIndia ::.
Official Iran Support Forum : ASANGSM FORUM
Bangladesh: Advance Box - Dhaka Mobile
Chinese Support forum : www.yananliuhuan.com



The Master Piece



http://forum.gsmhosting.com/vbb/f609/atf-sl3-simlock-recovery-v9-0-update-discussion-thread-1522301/

UFA
28-09-2012, 10:19
Atf 9.12 auto-update 9-25-2012
*******************************
Advance Turbo Flasher v9.12
*******************************

Release Date: September 25, 2012


* Added Suport for TP unlocking of Lumia 800 with TOSHIBA Flash Chip
* Improved support for "stock" firmware unlock for Lumia 710 and Lumia 800 TP Unlock


*** WARNING ***
TOSHIBA Flash Chip Unlock will take 10-20 minutes (a lot longer than non-Toshiba Flash Chip)


Discussion Thread:

ATF Lumia TP Unlock 9.12 Update - AUTO UPDATE!! Public Discussion Thread:

http://forum.gsmhosting.com/vbb/f609/atf-lumia-tp-unlock-9-12-update-auto-update-public-discussion-thread-1536323/index16.html#post8781750





http://forum.gsmhosting.com/vbb/f475/atf-9-12-auto-update-9-25-2012-a-1541049/

UFA
11-12-2012, 11:10
ATF Lumia 7.x Direct Unlock v9.30 Update!! 10 Dec 2012!
dvance Turbo Flasher v9.30

Release Date: December 10, 2012

Firmware Version Required : 10.3.30


[MAJOR UPDATE]

Introducing The Lumia Windows Phone 7.x eMMC Direct Module

Main Qualcomm OSBL Functions:

- Direct Unlock Lumia 710 via USB Cable (Qualcomm OSBL Only, DLOAD OSBL NOT SUPPORTED)

- Direct Unlock Lumia 800 via USB Cable (Qualcomm OSBL Only, DLOAD OSBL NOT SUPPORTED)

Other Qualcomm OSBL Functions:

- Direct Write OSBL original ESCO File Format via Qualcomm OSBL

- Direct Write Windows 7.x OS (boot.img) ESCO File Format via Qualcomm OSBL

- Direct Read/Write all Partitions in the Master Boot Record

- Backup/Restore PMM, Simlocks, Certificates and RPL

- Change Product Code

- Repair Corrupted AMSS Problems after TP Boot Repair

- Direct Write Custom Firmware to WP_OS Partition

All eMMC Direct Functions requires Qualcomm OSBL.

If you have a Lumia 710 with DLOAD OSBL, you can flash the Phone via USB to get Qualcomm OSBL.

If you have a Lumia 800 with DLOAD OSBL, you need to use TP Method and write QCOM OSBL via TP.

If you have Lumia Lumia 510, 610 or 900, then you cannot use eMMC Direct Module on them.


IMPORTANT INFORMATION

- You need "Administrator Rights" if you want to use the eMMC Direct Module.

Easiest way to get Administrator Rights is to go to C:\AdvanceBox Turbo Flasher\

then RIGHT-CLICK Mouse on "AdvanceBox.exe", then select:

--------> 'Run as administrator'

You need to do this everytime you want to use the eMMC Direct Module


SL3 BF Price Reduce

20% Discount on SL3 BF Unlock (Now only need 20 Credit for each phone)


IOS IMEI Check

100% Discount on iPhone Provider Info (iDevice IMEI Information)[Limited Time ONLY]


ATF Lumia 7.x Direct Unlock v9.30 Update!! Public Discussion Thread:
ATF Lumia 7.x Direct Unlock v9.30 Update!! Public Discussion Thread:

ATF [Advance Turbo Flasher] official web sites:
International - http://www.advance-box.com/

http://forum.gsmhosting.com/vbb/f475/atf-lumia-7-x-direct-unlock-v9-30-update-10-dec-2012-a-1580383/

saied217
26-02-2014, 14:02
943714
ATF v11.01 - via ATF Auto Update Server
خودم تستش کردم-کاملا سالمه
از لینک مدیافایر دان کنید




Release Date: February 6, 2014
Firmware Version Required : 11.0.00 (NEW FIRMWARE)


* Fixed SX-4 Module Failure
* Allows ATF Exe to work without Internet Connection
* Added Samsung SDC Unbricker Image Writer

DOWNLOAD SDC Files Here:
SAMSUNG SDC FILES by d18.builder - 4shared (http://www.4shared.com/folder/w9n0Nuo7/SAMSUNG_SDC_FILES.html)

After Downloading SDC Files, copy them to:
C:\AdvanceBox Turbo Flasher\SD_CARD\SDC_IMAGE\


ATF v11.00
Release Date: February 3, 2014
Firmware Version Required : 11.0.00 (NEW FIRMWARE)

[New ATF Box Firmware]
LogiCore 11.0.00
* ULTRA FAST SD Card Password Brute Force Speed Upto 20,000 Passwords Per Second on Class 10 Cards
* 6000% Speed Increase in SD Card Password Brute Force Speed Compared to LogiCore 10.8.30
* Absolutely the Fastest SD Card Password BF Solution in the World
* Added SD Card RAW Read/Write Module with upto 2 MBPS Transfer Rate
* Big Improvement on eMMC TP Write Speed (6000% Speed Increase) with upto 2MBPS Transfer Rate
* Big Improvement on ATF JTAG Speed with Turbo JTAG Technology upto 30 Mhz usable TCK Speed

[ATF Plus]
* Added SDC Tool - Direct RAW Read/Write for micro SD Cards
* Direct Write Samsung Debrick Images for Supported Qualcomm Based Phones
--> UN-BRICK / REPAIR DEAD BOOT Phones WITHOUT JTAG!!!
* Read/Write Speeds upto 2 MBPS
* Automatic Fatory Erase Before Writing
* Automatic Verify Written Blocks
* Supports ATF Big SD Card Slot or ATF Micro SD Card Adapter Cable
* Adjustable Speed from 5 Mhz to 30 Mhz
* Supports SDHC and SDXC Cards (Upto 2TB Size)
* Adjustable VCCIO (1.80v, 2.80v or 3.30v)
* Custom Read/Write Address
* Selectable BLOCK Addressing or NON-LBA Addressing
* Supports sdc, img, bin or raw Formats

* Improvements in eMMC Tool
* eMMC Write Speed is now 60x Faster (1GB = 10 Minutes)
* Now Supports ".mmc" Repair Files for Dead Boot Repair via eMMC Connection
* Automatic VPP 3.0v Output for ATF Big Boxes during EMMC_MODE
--> Now you can directly power eMMC without Voltage Regulators

[Intel/Infineon XG221]
RM-934 : Nokia Asha 500 Dual SIM
RM-973 : Nokia Asha 500
* Added XG221 Full Flashing
* Added XG221 Mass Memory Flashing
* Added XG221 Backup RPL etc...
* Added XG221 Decrypt PM 120 HASH for 15-Digit Phones
[ATF Turbo JTAG]
* Added Turbo JTAG in Settings to Boost JTAG Speed to 30 Mhz, 15 Mhz or 10 Mhz
--> Find this new Option in "Settings" ----> "Turbo JTAG"
* Added Lumia 900 "IMEI Repair" / "IMEI Restore" (RM-808 and RM-823 Supported)
--> Use this at your OWN RISK
* Added Estimated Time to Finish Task
--> Put Mouse Over Progress Bar
* Additional GUI Enhancements
[Driver Updates]
* New ATF Box Signed Drivers for 32/64 Bit Windows XP, 7 and 8 (Version 2.8.30.0)
* New Nokia Connectivity Cable Driver (Version 7.1.182.0)
* New WinUSB Extensions for 32/64 Bit Bit Windows XP, 7 and 8

[Server Updates]
* RSA Signing Server for ATF Exe now Implemented Starting with ATF v11.00

[General Updates]
* Complete Product Listing in Nokia.ini as of February 3, 2014
* Complete WP7/WP8 Variant Listing as of February 3, 2014

[IMPORTANT ANNOUNCEMENTS]
1. ATF New Driver DOES NOT SUPPORT Older ATF Software Versions (Anything Below v11.00)
2. LogiCore 11.0.00 DOES NOT SUPPORT Older ATF Software Versions (Anything Below v11.00)
3. You need to be Connected to the Internet "THE FIRST TIME" you run AdvanceBox.exe v11.00



----------------------------------------------------------------------------




Official Download Links:

[ATF v11.00 + ATF JTAG 1.06 FULL INSTALLER]

ATF_v11.00_Full_Installer_(FIXED).rar via www.4shared.com (http://www.4shared.com/rar/2iaHeLRpce/ATF_v1100_Full_Installer__FIXE.html)
ATF_v11.00_Full_Installer_(FIXED).rar via (http://www.mirrorcreator.com/files/0VDCPKUT/ATF_v11.00_Full_Installer_(FIXED)_0.rar_links)www. mirrorcreator.com (http://www.mirrorcreator.com/) 1
ATF_v11.00_Full_Installer_(FIXED).rar via (http://www.mirrorcreator.com/files/IEFZRQDO/ATF_v11.00_Full_Installer_(FIXED)_1.rar_links)www. mirrorcreator.com (http://www.mirrorcreator.com/) 2


*********************
ATF Full Installer Fixed v11.00 - Mediafire Mirror:
https://www.mediafire.com/?g8t9b8hdh8cjx7z (https://www.mediafire.com/?g8t9b8hdh8cjx7z)
*********************

[ATF JTAG 1.06 FULL INSTALLER]
ATF_JTAG_v1.06_Full_Installer_(FIXED).rar via www.4shared.com (http://www.4shared.com/rar/yg1-Vqtkba/ATF_JTAG_v106_Full_Installer__.html)
ATF_JTAG_v1.06_Full_Installer_(FIXED).rar via www.mirrorcreator.com (http://www.mirrorcreator.com/files/GT4D3GKL/ATF_JTAG_v1.06_Full_Installer_(FIXED).rar_links)


[ATF JTAG 1.06 EXE + LUMIA 900 IMEI REPAIR ONLY]

ATF_JTAG_v1.06_EXE_ONLY_(FIXED).rar via www.4shared.com (http://www.4shared.com/rar/8eGxOFP4ba/ATF_JTAG_v106_EXE_ONLY__FIXED_.html)
ATF_JTAG_v1.06_EXE_ONLY_(FIXED).rar via www.mirrorcreator.com (http://www.mirrorcreator.com/files/0NFGVOSF/ATF_JTAG_v1.06_EXE_ONLY_(FIXED).rar_links)

saied217
02-10-2014, 13:14
ATF v11.70

تستش کردم

Download (http://www.mediafire.com/download/jwgqt5unuk20n89/ATF_v11.70_Full_Installer.rar)

mobile n8
26-11-2014, 10:54
لینک دانلود ورژن ATF_v11.80 فول


http://www.atfsupport.com/getFile.php?file=ZmlsZS1zdXBwb3J0L0FURiBGdWxsIEluc 3RhbGxlci9BVEZfdjExLjgwX0Z1bGxfSW5zdGFsbGVyLnJhcg= =

saied217
10-02-2015, 17:29
ATF 11.92

تست شده هست (با قابلیت آپدیت آنلاین باکس)
(حجم فایل حدودآ 6 مگ هست، پس تعجب نکنید، فقط فایل اجرایی هست)
(فایل رو خودم تست کردم و سالم هست)

http://174.120.45.27/current_exe/AdvanceBox.exe

1- دانلود کنید
2- فایل دانلود شده رو کپی کنید در پوشه اصلی برنامه (باید جایگزین فایل قبلی بشه)
3- باکس رو وصل کنید به سیستم و ATF رو اجرا کنید
4- برید به سربرگ Product Support
5- روی Restore Box کلیک کنید (به نت وصل شوید، آنلاین انجام میشه)
6- بعد حدود 10 تا 15 دقیقه و انجام کامل ریستور شدن و آپدیت، برنامه را بسته و دوباره اجرا کنید
7- تمام شد، می تونید استفاده کنید

soote_delan
12-08-2015, 14:13
ايول برادر
:bc: