PDA

توجه ! این یک نسخه آرشیو شده میباشد و در این حالت شما عکسی را مشاهده نمیکنید برای مشاهده کامل متن و عکسها بر روی لینک مقابل کلیک کنید : كرنل جديد RedPillKernel براي گلكسي 2 (آپديت25بهمن-پست18)



C0D3R
06-02-2012, 11:00
سلام به همه دوستان

كرنل جديد RedPillKernel رو معرفي ميكنم

اين كرنل قابليت اوركلاك كردن و آندر كردن رو داره و كاري از pongster هست



ويژگيهاي كرنل :

- از ClockworkMod Based Recovery v5.0.2.7 استفاده ميكنه

- استفاده از Samsung kernel-update3 براي فيكس كردن Deep-Sleep

- اتو روت هست

- از Superuser 3.0 استفاده ميكنه

- پشتيباني از Init.d

- پشتيباني از SetCPU and Voltage Control

- پشتيباني از Full CWM Manager 3.0

- و . . .

Features



Initramfs from LA2
Samsung kernel-update3 (patched for deep sleep fix)
Based on Arighi sources (arighi) + a LOT of patches included by pongster for performance, stability and battery life
Custom ClockworkMod Based Recovery v5.0.2.7 by AF974 based on Team Overcome Recovery (thanks to alterbridge and AF974)
Instant root (modded script by gokhanmoral of SiyahKernel with a few edits by pongster to ensure latest SU apk and binary are used.)
Newest Superuser 3.0 and su binary (thanks to chainsdd)
Touchscreenfix set to "3" (vitalij)
Init.d support
VooDoo Louder Support by supercurio
2nd Core and Touch Move by Tegrak Support
SetCPU and Voltage Control Support
Full CWM Manager 3.0 Support by Chainfire
Experimental AOSP/CM7/MIUI Support by gokhanmoral ("u" versions)
CPU & GPU Overclocking and Undervolting by Netarchy
Highly Experimental Ondemand based CPU Governors (Minor Edits only/Renamed to keep bugs on the experiments) based on arighi's deep_sleep and fast_start commits
Maximum CPU Freq set at 1.5Ghz
Enable or Disable File Syncing (fsync)
Stochastic Fair Blue (SFB) Network Scheduler Enabled
CFS Autogroup by Mike Galbraith Enabled
CPU Topology and Sched_MC enabled
AFTR and LPA enabled
A lot of tunables via sysfs included
Undervolted Int ARM and Touch LED Values (thanks to Phenomenal for the idea)
Git Implementation of SHA-1 for 12% faster boot time
CPU set at 1.2Ghz at Boot for faster boot time (Thanks to Imoseyon)
XZ compressed kernel using optimized values for the size of the kernel
Uncompressed Initramfs (tweaked scripts/gen_initramfs.sh)
NTFS Read/Write Support for OTG (Flash Drives and External Hard Drives with enough Power supported)
CIFS and FUSE Support |* Tweaked Ext4 Filesystem
SIO*|* noop*|* deadline (tweaked for better throughput and balanced latency for Mobile NAND based devices)
sleepy | hyper | *conservative | ondemand CPU Governors
generic cpufreq range regulation (arighi)*|* BLN support (Thanks to creams and neldar)*| *Fuel Guage Wakelock fix by Entropy512

Power Saving Features:


AFTR + LPA enabled
sched_mc enabled
ARM CPU Topology enabled
CPU Hotplugging OFF when screen off enabled (Thanks to arighi)
RCU Fast No HZ enabled
Stable Voltage Tweaks for Internal Voltages (not ARM Voltage which remain stock) to help lessen heat when in heavy usage scenarios


Boot Time Features:

Used git Implem of SHA-1 for 12% Boot time improvement
Added [PATCH] arm: remove "optimized" SHA1 routines by Linus Torvalds <torvalds@linux-foundation.org>
Added [PATCH] arm: remove stale export of 'sha_transform' Linus Torvalds <torvalds@linux-foundation.org>
Uncompressed initramfs (since initramfs is compressed as part of the kernel image, this is reduced to a copy operation from a decompress then copy one)
Set Clockspeed at 1.2Ghz at Boot time to ensure all critical tasks have enough power to perform them while the governors/maxfreq isn't set yet. (Thanks to Imoseyon for this hack)


CPU Features


CPU and GPU OC/UV thanks to netarchy/Hacre


CPU Governors Included:
Final Clean up of CPU Governors available for simplicity. (all Governors are tweaked for the best possible balance of battery and performance with a slight lean towards performance) With this focus on simplicity stated earlier, the only governors available are the following:


sleepy (ondemand based cpu governor with minor edits by pongster) loves to sleep and idle at the lowest set frequency, hence the name change from "solo" to "sleepy". Its closer to ondemandx in terms of performance. This can be tweaked and tuned using init.d scripts as well.
hyper (ondemand + suspend freq setting ability with minor edits by pongster) This was formerly the original kenobi which I renamed to hyper as others may not get the Star Wars Reference. http://media.xda-developers.com/images/smilies/smile.gif It gives a good balance between battery life and performance. Its closer to ondemand in terms of performance. also tunable using init.d scripts.
conservative (good battery savings by default due to its slow ramp up and ramp down but tunable for performance) defaults are slightly tweaked for better performance than default conservative.
ondemand (old reliable thats been tweaked by arighi to support deep_sleep and fast_start) these features try to detect if the CPU is coming from a deep sleep and is more likely to sleep again and thus limits its frequency to the lowest possible that can handle the operations needed. fast_start checks if the CPU needs more "ooomph" and jumps to the highest frequency faster to enable it to complete the operation the system needs to complete. (like during boot-up)


3rd Party Kernel Apps Support


CWM Manager 3.0 (It works well for me. Its a useful app by Chainfire that extends the features of the current recovery. No need to reinvent the wheel, so to speak)
Voodoo Louder by supercurio
Voodoo Display (for future supercurio app)
2nd Core by Tegrak
Touch Move by Tegrak
SetCPU by michaelhuang
Voltage Control by xan

Filesystem Features (loaded by default to prevent the load insmodding at boot will cause, however minor)

CIFS
FUSE
NTFS



Experimental NTFS automount for OTG devices (you'll have to do a little more work to enable sdcard as ntfs) (Thanks to gokhan for the hotplug script as base.) This script uses the native NTFS RW support available in t he kernel instead of ntfs-3g

Ext4 Tweaks from 3.x.x branch:

[PATCH] ext4: fix ext4_end_io_dio() racing against fsync() from https://lkml.org/lkml/2011/12/16/311... *Reported-by: (https://lkml.org/lkml/2011/12/16/311%3Cbr%20/%3E%3Cbr%20/%3E*Reported-by:) Kent Overstreet <koverstreet@google.com>
*Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
[PATCH] ext4: avoid hangs in ext4_da_should_update_i_disksize() from https://lkml.org/lkml/2011/12/16/344...Signed-off-by: (https://lkml.org/lkml/2011/12/16/344%3Cbr%20/%3E%3Cbr%20/%3E*Signed-off-by:) Andrea Arcangeli <aarcange@redhat.com>
*Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

I/O Schedulers

SIO
deadline (tweaked for Flash)
noop

Performance Patches

Mike Galbraith's Ultimate CFS Performance Patch (CFS Autogroup)<efault@gmx.de> as ported by faux123 <reioux@gmail.com> for 2.6.35 kernels. I (sarcastillo <sar.castillo@gmail.com>) additionally edited some things in sched.c to make it compile properly for 2.6.35.14 Samsung Sourced kernels*More info on this here: https://lkml.org/lkml/2010/11/20/91

Added the CGroup Patch:*Added [PATCH] cgroup: Provides a way of tasks grouping by timer slack value by Kirill A. Shutemov <kirill@shutemov.name> Based on patch by Jacob Pan. Introduces per cgroup timer slack value which will override the default timer slack value once a task is attached to a cgroup. It's useful in mobile devices where certain background apps are attached to a cgroup and minimum wakeups are desired.

Miscellaneous Patches

Added [PATCH] cpu-hotplug: Add the function 'cpu_hotplug_inprogress' by Maya Spivak <mspivak@codeaurora.org>
Added [PATCH] printk: Don't allow cpu to get console lock during hotplugging by Maya Spivak <mspivak@codeaurora.org>
Added [PATCH] rcu-tree: Check for extended quiescent state at start of gp by Maya Spivak <mspivak@codeaurora.org>
Added [PATCH] sched: Do not block when waiting to free old root domain by Maya Spivak <mspivak@codeaurora.org>
Enabled fsync disabled (can be disabled by doing an echo "1" > /sys/module/sync/parameters/fsync_disabled in a terminal emulator or as a script for gscript or scriptmanager)
Touchscreen fix set to "3" for more responsiveness during games, etc. (Thanks to vitalij)

*Experimental AOSP/MIUI/CM7 Support *Only for "u" version* Experimental Support for Non-Samsung ROM's thanks to gokhanmoral's siyah_feature_set which I ported from his kernel tree and used his initramfs as a base for the *u* versions If this doesn't work then it doesn't work. Use another kernel. Simple right?

Custom CWM Recovery made by af974 (Huge props to him!) based on Team Overcome Recovery (Huge props to them!)

Enabled back key
Enabled Power button to select (less chance of double pressing the Home Button and format sdcard fro some users)
Reorganized, Inutitive layout and more Readable menu
No/Yes Selection Tweak (If you know how to get to Recovery, you don't need that many "No's")
Mount Internal AND Mount External from Recovery (We figured this would be quite Useful)


نحوه نصب :

كرنلهايي كه عنوان tar رو بهمراه دارن با Odin نصب ميشن

كرنلهايي كه عنوان CWM رو بهمراه دارن از ريكاوري مود نصب ميشن


لينك دانلود :

RedPillKernel_Rev1.2.tar (http://cl.ly/0J121m0x2W2Y183c001c)

RedPillKernel_Rev1.2_CWM (http://cl.ly/1l1A320Y1I0X2f1v142m)

*r.E.Z.a*
06-02-2012, 11:15
سلام
محمد عزیز این کرنل میشه رو رام 2.3.6 بزنی

C0D3R
06-02-2012, 11:16
سلام
محمد عزیز این کرنل میشه رو رام 2.3.6 بزنی

سلام رضا جان
بله ميتونين و مشكلي نيست

mehdii7
06-02-2012, 14:08
این کرنل رو رام miui جواب میده دوست عزیز

RadeoN
06-02-2012, 15:17
محمد جون من فلش زدم ولی گوشیم بالا نیمد
rom:xwkk5 FOiL

reza161
06-02-2012, 15:17
سلام اگر کسی تونست دانلود کنه لطفا رو سایت آپلودش کنه که باقی هم بتونن استفاده کنند با تشکر

Shahrokh K!NG
06-02-2012, 15:38
نسخه Odin:

دانلود (http://hipfile.com/kzj6xpmxc05n/RedPillKernel_Rev1.2.tar.html)


نسخه CWM:

دانلود (http://hipfile.com/vs9tx5f5s2sy/RedPillKernel_Rev1.2_CWM.zip.html)

p.z12791
06-02-2012, 15:43
Odin

http://forum.mobilestan.net/Download.png (http://dl.mobilestan.net/index.php/files/get/vT4SwnVPYv/redpillkernel-rev1.2.zip)


CWM

http://forum.mobilestan.net/Download.png (http://dl.mobilestan.net/index.php/files/get/F4IhB-4t7r/redpillkernel-rev1.2-cwm.zip)

morteza_goli
06-02-2012, 17:42
اگه نصب کردین لطفا بگین نسبت به جفری 2.1 بهتره یا نه؟ هم باتری هم اینکه مشکل نداشته باشه!

alireza1807
06-02-2012, 17:51
سلام

این کرنل رو برای رام های اندروید 4 میشه استفاده کرد؟؟

C0D3R
06-02-2012, 18:58
محمد جون من فلش زدم ولی گوشیم بالا نیمد
rom:xwkk5 foil

سلام
زمانیکه بالا نمیاد گوشی رو خاموش کنین و بعد در حالت ریکاوری مود روشن کنین و وایپ کش و وایپ دالویک کنین و ریبوت کنین , کمی صبر کنین بالا میاد

amin.gholizad
09-02-2012, 10:33
Filesystem Features (loaded by default to prevent the load insmodding at boot will cause, however minor)
CIFS

FUSE

NTFS

Experimental NTFS automount for OTG devices (you'll have to do a little more work to enable sdcard as ntfs) (Thanks to gokhan for the hotplug script as base.) This script uses the native NTFS RW support available in t he kernel instead of ntfs-3g



میشه راجع به این بخش توضیح بدین.
یعنی با این کرنل ntfs رو چطوری باید فعال کنیم؟

mja2446
09-02-2012, 10:53
ok alie faghat engar masrafesh y name oute

C0D3R
09-02-2012, 11:03
Filesystem Features (loaded by default to prevent the load insmodding at boot will cause, however minor)
CIFS

FUSE

NTFS

Experimental NTFS automount for OTG devices (you'll have to do a little more work to enable sdcard as ntfs) (Thanks to gokhan for the hotplug script as base.) This script uses the native NTFS RW support available in t he kernel instead of ntfs-3g



میشه راجع به این بخش توضیح بدین.
یعنی با این کرنل ntfs رو چطوری باید فعال کنیم؟

سلام
امین جان درحالت کلی اتومانت هست و فقط کافیه فلش مموری رو بهش وصل کنین خودش شناخته میشه اما اگر وصل کردین نشناخت دستور زیر رو در ترمینال وارد کنین :

ls /mnt/usb

god.hsl
09-02-2012, 11:13
لطفا ورژن جدیدش (1.3.3x) رو قرار بدید
ممنون

god.hsl
09-02-2012, 11:17
عذر میخام. با کرنل NEAK اشتباه گرفتم!!!
خودم ورژن 1.3.3x کرنل neak رو پیدا کردم. میزارم که دوستان استفاده کنن
mirror.zantekk.de/neak/current/N.E.A.K-1.3.3x.zip
سپاس

roozbeh1580
14-02-2012, 01:30
سلام به همن اونم این وقت شب
اینم ورژن جدید این کرنل
RedPillKernel_Rev1.3 2012.02.14
توضیحات فارسی رو که محمد جان در پست اول گفتن
Highlights
*. Initramfs from LA2
*. Samsung kernel-update3 (patched for deep sleep fix)
*. Based on Arighi sources (arighi) a LOT of patches included by pongster for performance, stability and battery life
*. Custom ClockworkMod Based Recovery v5.0.2.7by AF974 based on Team Overcome Recovery (thanks to alterbridge and AF974)
*. Instant root (modded script by gokhanmoral of SiyahKernel with a few edits by pongster to ensure latest SU apk and binary are used.)
*. Newest Superuser 3.0 and su binary (thanks to chainsdd)
*. Touchscreenfix set to "3" (vitalij)
*. Init.d support
*. VooDoo Louder Support by supercurio
*. 2nd Core and Touch Move by Tegrak Support
*. SetCPU and Voltage Control Support
*. Full CWM Manager 3.0 Support by Chainfire
*. CPU & GPU Overclocking and Undervolting by Netarchy
*. Highly Experimental Ondemand based CPU Governors (Minor Edits only/Renamed to keep bugs on the experiments) based on arighi's deep_sleep and fast_start commits
*. Maximum CPU Freq set at 1.5Ghz
*. Enable or Disable File Syncing(fsync enabled by default)
*. CFS Autogroup by Mike Galbraith Enabled
*. CPU Topology and Sched_MC enabled
*. AFTR and LPA enabled
*. A lot of tunables via sysfs included
*. Undervolted Int ARM and Touch LED Values (thanks to Phenomenal for the idea)
*. Git Implementation of SHA-1 for 12% faster boot time
*. CPU set at 1.2Ghz at Boot forfaster boot time (Thanks to Imoseyon)
*. XZ compressed kernel using optimized values for the sizeof the kernel
*. Uncompressed Initramfs (tweaked scripts/gen_initramfs.sh)
*. NTFS Read/Write Support forOTG (Flash Drives and External Hard Drives with enough Power supported)
*. CIFS and FUSE Support | Tweaked Ext4 Filesystem
*. SIO | noop | deadline | V(R) (tweaked for better throughput and balanced latency for Mobile NAND based devices)
*. sleepy | hyper | conservative| ondemand CPU Governors
*. generic cpufreq range regulation (arighi) | BLN support (Thanks to creams and neldar) | Fuel Guage Wakelock fix by Entropy512
Power Saving Features:
*. AFTR LPA enabled
*. sched_mc enabled
*. ARM CPU Topology enabled
*. CPU Hotplugging OFF when screen off enabled (Thanks to arighi)
*. RCU Fast No HZ enabled
*. Stable Voltage Tweaks for Internal Voltages (not ARM Voltage which remain stock) to help lessen heat when in heavy usage scenarios
Boot Time Features:
*. Used git Implem of SHA-1 for12% Boot time improvement
*. Added [PATCH] arm: remove"optimized" SHA1 routines by Linus Torvalds <torvalds@linux-foundation.org>
*. Added [PATCH] arm: remove stale export of 'sha_transform' Linus Torvalds <torvalds@linux-foundation.org>
*. Uncompressed initramfs (since initramfs is compressed as part of the kernel image, this is reduced to a copy operation from a decompress then copy one)
*. Set Clockspeed at 1.2Ghz at Boot time to ensure all critical tasks have enough power to perform them whilethe governors/maxfreq isn't set yet. (Thanks to Imoseyon for this hack)
CPU Features
*. CPU and GPU OC/UV thanks to netarchy/Hacre
CPU Governors Included:
Final Clean up of CPU Governors available for simplicity. (all Governors are tweaked for the best possible balance of battery and performance with a slight lean towards performance) With thisfocus on simplicity stated earlier, the only governors available are the following:
*. sleepy (ondemand based cpu governor with minor edits by pongster) loves to sleep and idle at the lowest set frequency, hence the name change from "solo" to"sleepy". Its closer to ondemandx in terms of performance. This can be tweaked and tuned using init.d scripts as well.
*. hyper (ondemand suspend freq setting ability with minor edits by pongster) This was formerly the original kenobi which I renamed to hyper as others may not get the Star Wars Reference. Itgives a good balance betweenbattery life and performance. Its closer to ondemand in terms of performance. also tunable using init.d scripts.
*. conservative (good battery savings by default due to its slow ramp up and ramp downbut tunable for performance)defaults are slightly tweakedfor better performance than default conservative.
*. ondemand (old reliable thats been tweaked by arighi to support deep_sleep and fast_start) these features tryto detect if the CPU is coming from a deep sleep andis more likely to sleep again and thus limits its frequency to the lowest possible that can handle the operations needed. fast_start checks if the CPU needs more "ooomph"and jumps to the highest frequency faster to enable itto complete the operation thesystem needs to complete. (like during boot-up)
3rd Party Kernel Apps Support
*. CWM Manager 3.0 (It works well for me. Its a useful app by Chainfire that extends thefeatures of the current recovery. No need to reinvent the wheel, so to speak)
*. Voodoo Louder by supercurio
*. Voodoo Display (for future supercurio app)
*. 2nd Core by Tegrak
*. Touch Move by Tegrak
*. SetCPU by michaelhuang
*. Voltage Control by xan Filesystem Features (loaded by default to prevent the load insmodding at boot will cause, however minor)
*. CIFS
*. FUSE
*. NTFS
*. Experimental NTFS automount for OTG devices (you'll have to do a little more work to enable sdcard as ntfs) (Thanks to gokhan for the hotplug script as base.) This script uses the native NTFS RW support available in t he kernel instead of ntfs-3g Ext4 Tweaks from 3.x.x branch:
[PATCH] ext4: fix ext4_end_io_dio() racing against fsync() from https://lkml.org/lkml/2011/12/16/311... *Reported-by: Kent Overstreet <koverstreet@google.com>
*Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
[PATCH] ext4: avoid hangs in ext4_da_should_update_i_disksize() from https://lkml.org/lkml/2011/12/16/344...Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
*Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
I/O Schedulers
*. SIO (2012 0.2 version)
*. deadline (tweaked for Flash)
*. noop
*. V(R) Performance Patches
Mike Galbraith's Ultimate CFS Performance Patch (CFS Autogroup)<efault@gmx.de> asported by faux123 <reioux@gmail.com> for 2.6.35 kernels. I (sarcastillo <sar.castillo@gmail.com>) additionally edited some things in sched.c to make it compile properly for 2.6.35.14SamsungSourced kernels*More info on this here: https://lkml.org/lkml/2010/11/20/91
Added the CGroup Patch:* Added [PATCH] cgroup: Provides a way of tasks grouping by timer slack value by Kirill A. Shutemov <kirill@shutemov.name> Basedon patch by Jacob Pan. Introduces per cgroup timer slack value which will override the default timer slack value once a task is attached to a cgroup. It's useful in mobile devices where certain background apps are attached to a cgroup and minimum wakeups are desired.
Miscellaneous Patches
*. Added [PATCH] cpu-hotplug: Add the function 'cpu_hotplug_inprogress' by Maya Spivak <mspivak@codeaurora.org>
*. Added [PATCH] printk: Don't allow cpu to get console lock during hotplugging by Maya Spivak <mspivak@codeaurora.org>
*. Added [PATCH] rcu-tree: Check for extended quiescentstate at start of gp by Maya Spivak <mspivak@codeaurora.org>
*. Added [PATCH] sched: Do notblock when waiting to free old root domain by Maya Spivak <mspivak@codeaurora.org>
*. Enabled fsync disabled (can be disabled by doing an echo"1" > /sys/module/sync/parameters/fsync_disabled in a terminalemulator or as a script for gscript or scriptmanager)
*. Touchscreen fix set to "3" formore responsiveness during games, etc. (Thanks to vitalij)
Custom CWM Recovery made by af974 (Huge props to him!) based on Team Overcome Recovery (Huge props to them!)
*. Enabled back key
*. Enabled Power button to select (less chance of double pressing the Home Button andformat sdcard fro some users)
*. Reorganized, Inutitive layoutand more Readable menu
*. No/Yes Selection Tweak (If you know how to get to Recovery, you don't need thatmany "No's")
*. Mount Internal AND Mount External from Recovery (We figured this would be quite Useful)
اینو داشته باشید تا لینک مستقیم دانلود رو براتون بزارم
موفق باشید

roozbeh1580
14-02-2012, 01:34
1 تغییر بیس ریکاوری به CWM 5.0.4.2
2 طرح جدید منو
3 شارژ باتری در حالت ریکاوری
4‏ و سایر تغییرات در منو ها از جمله reboot menu.install menu ‎‏ و غیره

Changelog:
-Based on new CWM 5.0.4.2made for ICS
-Usual custom layout as previous release, custom images (thanks to Pongster)
-New menus layout:
Reboot menu= reboot to system,recovery and power off
Install menu= choose from internal or external sdcard
wipe menu= wipe data/factory res, wipe cache, wipoe voltage settings(it wipes voltage controlscript), wipe battery stats.
backup and restore= backup either on internal or external sdcard, restore and advanced restore to the same way.
storage menu= mount/unmount partitions, mount internal or external sdcard
Touch button on screen
Since the touch feature, we have again 7 no and one yes.
Touch buttons layout(from leftto right) : BACK-UP-DOWN-SELECT
Battery percent
Battery charge while in recovery.
اینم لینک مستقیم واسه شما عزیزا

[url]http://www.up.sibdownload.com/images/2whm3ka8vykvm0v88tna.zip[/
url]
نصب از طریق ریکاوری
یاعلی

starsss
14-02-2012, 08:24
سلام
آیا میتونم از این کرنل روی بیس xlpb 4.0.3 استفاده کنم؟
ممنون

hadijoon_1988
14-02-2012, 15:14
سلام
آیا میتونم از این کرنل روی بیس xlpb 4.0.3 استفاده کنم؟
ممنون

نه دوست عزیز نمیشه

sh,m
14-02-2012, 20:49
سلام لطفا راهنمایی کنید من نمی تونم از ادرس لینک مستقیم دانلود کنم

RadeoN
15-02-2012, 09:32
سلام لطفا راهنمایی کنید من نمی تونم از ادرس لینک مستقیم دانلود کنم





دانلود (http://www.up.sibdownload.com/images/2whm3ka8vykvm0v88tna.zip)

arminkhasteh
15-02-2012, 14:06
سلام این کرنل رو میشه رو اندروید 4(بر پایه ی kp8) ریخت؟؟
کرنل روت شده هستش؟

RadeoN
15-02-2012, 14:37
سلام این کرنل رو میشه رو اندروید 4(بر پایه ی kp8) ریخت؟؟
کرنل روت شده هستش؟

نه دوست عزیز نصب نکنید

god.hsl
15-02-2012, 14:43
این کرنل با رام های 2.3.5 مخصوصا رام ایران مشکل داره. یا بالا نمیاد یا گیر میکنه!
روی 2.3.6 xila عالی جواب میده. مخصوصا این ورژن جدیدش که ریکاوری تاچ شده

RadeoN
15-02-2012, 16:54
این کرنل با رام های 2.3.5 مخصوصا رام ایران مشکل داره. یا بالا نمیاد یا گیر میکنه!
روی 2.3.6 xila عالی جواب میده. مخصوصا این ورژن جدیدش که ریکاوری تاچ شده


برا من که sleep خوبی داره ولی بد جوری مصرف میکنه