PDA

توجه ! این یک نسخه آرشیو شده میباشد و در این حالت شما عکسی را مشاهده نمیکنید برای مشاهده کامل متن و عکسها بر روی لینک مقابل کلیک کنید : جدیدترین کاستوم رام s8500 بر پایه KL6



SAEED.S.i.S
06-01-2012, 15:09
اینهم جدیدترین کاستوم رام بادا 2 برای ویو 1

توسط کوکر معروف Fosamobi ساخته شده با تغییرات زیاد..



This Firmware is built with KL6 version

=> At the first utilisation, after flashing you Wave, you must do the following instruction
-> Go in Setting > Display > Active the Percentage Battery (in green on 1)
-> Memorize the number of Percentage Battery life in top
-> Return on Desktop and Power Off your Wave
-> Remove the Battery
-> Power On your Wave without battery (to clear energy in Wave)
-> Keep pressing the button Power On during 10 second
-> Do another Power On without battery and keep pressing Power On during 10 second
-> Replace the Battery, Power On the Wave and see the number of Pourcentage Battery
Perhaps, between the 2 Power Off / Power On, at first, the number is very different
Do several sequence as I write with Power Off, Power On without battery, replace battery...

You must have approximately the same number shown in the percentage of battery life



دانلود از هات فایل (http://hotfile.com/dl/139214160/71aa86a/Fosamobi2012_S8500.zip.html)


طبق عکس ضمیمه فلش بزنید..